![]() Standing over your bed dissolves all fear of dropping your scope and should be written in the manual, for all to have. I think mine was not spun quickly enough as I was very carefull while in the ceramic tiled floor area. I walked into the kitchen/den to see if there was a problem there and no problem in there now. I turned it off and back on in the bedroom to double check and it was spot on. Then i helicoptered it about 15 times again fast, then twisted it about 15 times and the compass now works. I rotated it end over end quickly about 15 times and peeked it said ERR I was like, ok. I decided to go to the bedroom on the opposite side of house and stood over the bed not worrying about dropping it now while standing over the bed. Note, kitchen/den is where we live (tv, cable, wifi, all electrical fields around). The first couple of times of trying all this in my kitchen and nothing worked. Ok, I did what guys on this site said in my kitchen being very careful turning a $3,000 toy in the air (we all know we could drop it). I looked on this site because the owners manual and the video (atn) states ERR would be a damaged scope, requiring it to be sent back? However, he also said he had never seen this? Wait for it to finish.My new Thor 4 2-8x when turned on the compass did move for a second, stayed on N and then went to ERR. Download the ATN Corp factory restore firmware where you can load the latest Obsidian 4 device series firmware update to your ATN smart product and more. Y ou will see the Android recovery screen with the green robot.You can now release the RESTORE-/UPGRADE-button. When you see 0000 on the LED-display (for ATN500 and ATN500II you will see the Android recovery screen with the green robot, the restore process was stated.The set top box will show 0000 on the LED-display. Power on the set top box while holding the RESTORE-/UPGRADE-button down.On the ATN-500 and ATN-3000 it is located on the back. On the ATN-1000 and ATN-2000 the button is located on the side of the set top box (named Restore). Press and hold the RESTORE-button (called UPGRADE-button on the ATN-3000 and unnamed on the ATN-500) on the set top box box.You do not need to rename the file for ATN-500II, ATN-1000II, ATN-2000II or ATN-3000II.For ATN-3000 rename it to: update_atn3000.For ATN-2000 rename it to: update_atn2000.For ATN-1000 rename it to: update_atn1000.For ATN-500 rename it to: update_atn500.Copy the firmware file to the USB root directory and rename it:.Download the appropriate firmware file for your box :.Please follow these instructions to restore the firmware on the box: If you are experiencing problems with your ATN-500, ATN-1000, ATN-2000 or ATN-3000 set top box, you can try to restore the firmware on the box. How do i restore the firmware on my set top box? ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |